USB Blaster Download Cable is designed for ALTERA FPGA, CPLD, Active Serial Configuration Devices and Enhanced Configuration Devices, USB 2.0 connection to the PC and JTAG, AS, PS to the target device.Official reference can be found here.
- Altera Usb Blaster Driver Windows 7
- Altera Usb Blaster Driver Windows 7
- Altera Usb Blaster Driver Free Download
- Altera Usb Blaster Driver Installation
Contents
- Wiring Connections
You can configure debugging tool using debug_tool option in“platformio.ini” (Project Configuration File):
Altera USB-Blaster™ Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board. The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. C: altera 12.1 quartus drivers usb-blaster-ii (not the one layer below e.g. The system will pick up from.inf and the correct x86 driver from there. Quote End - Hi, This problem caused from driver. The windows don't trust this Usb driver for 'unsigned agreemet or certificated'. Download Center for FPGAs - Get the complete suite of Intel design tools for FPGAs. The Altera On-Board USB-Blaster II cable appears as Altera USB-Blaster (unconfigured) when first attached to your system. After it has been configured by the Quartus Prime software, it will appear as Altera USB-Blaster II (JTAG interface) and then Altera USB-Blaster II (SystemConsole interface).
If you would like to use this tool for firmware uploading, please changeupload protocol:
More options:
Altera Usb Blaster Driver Windows 7
Please install official drivers.
| USB-Blaster JTAG 10-Pin Connector | Board JTAG Pin | Description |
|---|---|---|
| 1 | TCK | JTAG Return Test Clock |
| 2 | GND | Digital ground |
| 3 | TDO | Test Data Out pin |
| 4 | VCC | Positive Supply Voltage — Power supply for JTAG interface drivers |
| 5 | TMS | Test Mode State pin |
| 9 | TDI | Test Data In pin |
| Name | Description |
|---|---|
| GigaDevice GD32V | The GigaDevice GD32V device is a 32-bit general-purpose microcontroller based on the RISC-V core with an impressive balance of processing power, reduced power consumption and peripheral set. |
| Nuclei | Find professional RISC-V Processor IP in Nuclei, first professional RISC-V IP company in Mainland China, match all your requirements in AIoT Era. |
| Name | Description |
|---|---|
| Arduino | Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences |
| GigaDevice GD32V SDK | GigaDevice GD32VF103 Firmware Library (SDK) is a firmware function package, including programs, data structures and macro definitions, all the performance features of peripherals of GD32VF103 devices are involved in the package |
| Nuclei SDK | Open Source Software Development Kit for the Nuclei N/NX processors |
Altera Usb Blaster Driver Windows 7
Note
Altera Usb Blaster Driver Free Download
For more detailed board information please scroll tables below by horizontal.
Altera Usb Blaster Driver Installation
| Name | Platform | Debug | MCU | Frequency | Flash | RAM |
|---|---|---|---|---|---|---|
| GD32VF103V Evaluation Kit | Nuclei | External | GD32VF103VBT6 | 108MHz | 128KB | 32KB |
| GD32VF103V RVStar Kit | Nuclei | On-board | GD32VF103VBT6 | 108MHz | 128KB | 32KB |
| GD32VF103V-EVAL | GigaDevice GD32V | External | GD32VF103VBT6 | 108MHz | 128KB | 32KB |
| Sipeed Longan Nano | GigaDevice GD32V | External | GD32VF103CBT6 | 108MHz | 128KB | 32KB |
| Sipeed Longan Nano | Nuclei | External | GD32VF103CBT6 | 108MHz | 128KB | 32KB |
| Sipeed Longan Nano Lite | GigaDevice GD32V | External | GD32VF103C8T6 | 108MHz | 64KB | 20KB |
| Wio Lite RISC-V | GigaDevice GD32V | External | GD32VF103CBT6 | 108MHz | 128KB | 32KB |